Okay along with the airbag light staying on, none of my steering wheel radio controls work either......so that pop in the steering wheel when I turned it disconnected something......can any body help please....

Seems like I fixed my current problem by replacing the steering wheel sensor.....only to create a new problem.......I'm getting to old for this

Appreciate any help to resolve this new problem I just created, hope it'* just a connection that got disconnected....

Thanks

Your best course of action is to stick with your original topic. If a new topic would have been needed, it would have needed to have gone into electrical anyway.

https://www.gmforum.com/2000-2005-90/steering-sensitivity-rate-292831/

Thanks

I did post a reply to my original topic but couldn't find it posted, even to your response I posted and still couldn't find the reply posted......sorry, I'm still very new to the forum and not sure what to do at times.....

Thnaks

I removed the lower and upper shroud on the steering coloum, I can see the yellow air bag wire along with some other smaller wries which must be for the radio control buttons........everything is connected to a black plastic circular part, but there must be a place up inside the steering wheel cover where it can be disconnected........ so where do I go from here, how does the rest of the steering wheel come apart so I can see if that is where it is disconnected..........

Can some one please help me with the required repair to get my airbag light to go off and get my radio controls working again

Thank you

Still trying to remove the steering wheel cover to get at the connections for the radio buttons and air bag light........

I have removed the two torque screws on the bottom cover of the steering wheel, but I still can't pull off the front cover with the air bag

Can someone please help

Thanks

You may need to replace the clock spring in the steering wheel...... Same thing happened in my intrepid with the airbag light being on and radio controls, cruise and horn stopped working.. Turned out to be a bad clock spring.........

Thanks for the response, yes it'* definitely the clock spring, I just located one