Projector Fogs!
#1
Senior Member
Posts like a Corvette
Thread Starter
Join Date: Jun 2008
Location: Cleveland, OH
Posts: 1,389
Likes: 0
Received 0 Likes
on
0 Posts
Projector Fogs!
I have wanted to do an HID kit in my fogs for a long time and needed new housings anyways, everything that was made for the bonneville doesn't look that great, or is too small, so I got a set of projectors with angel eyes for an 04-06 Jeep Grand Cherokee
it takes H3 bulbs so i got an 880 relay harness to power the balasts, the only issue was getting the housings to mount to the factory bracket, i took one of my housings out and looked for a way to ge the projectors onto in, after a couple trys the only option was to remove the lense from the stock housing and cut the mounting parts off the back of it, then i put a **** load of hot glue to get the 2 pieces to hold together for now, i got one done yesterday ill do the other today
i'll post up some pics of before and after and while making the bracket
it takes H3 bulbs so i got an 880 relay harness to power the balasts, the only issue was getting the housings to mount to the factory bracket, i took one of my housings out and looked for a way to ge the projectors onto in, after a couple trys the only option was to remove the lense from the stock housing and cut the mounting parts off the back of it, then i put a **** load of hot glue to get the 2 pieces to hold together for now, i got one done yesterday ill do the other today
i'll post up some pics of before and after and while making the bracket
#2
Senior Member
Posts like a Turbo
Join Date: Dec 2008
Location: Mississauga Ontario
Posts: 323
Likes: 0
Received 0 Likes
on
0 Posts
i bolted mine to the side ring of the bumper where the OEM fog lights tuck in. The only **** off is that you can see the light giggle when going over a bump while driving.
Thread
Thread Starter
Forum
Replies
Last Post
Doppleganger
Detailing & Appearance
2
04-13-2006 08:13 PM