.....goes a pair of these:



Putting these on the doors where the SLE/SSE/SSEi emblems would go.
Will install when I do the 96-99 SSEi body kit.

Hehe... you should put a chrome smiley face right after them.

You have to DRILL your door skin for those!

im sure he could cut/grind off the pins and 3M tape it on

Yup... 3m is the way to go...

He don't need no stinking drilling

That'* going to be some tricky taping. X-acto knife time.

Time, patience... it'll pay off.

Yup, grinding, 3" wide 3M Automotive tape and the exacto were exactly my plan.

So aside from the install what do you guy'*/gal'* think -will they look good on the doors, or is there somewhere else I should put them?

I like the doors...people won't know what to think.

I'd recommend a dremel with a carbon blade, cut first then grind to smooth over to keep the heat down so you don't blue the chrome.

They are 4" long so the size is not the issue but honestly for the doors I wonder if something with more color would be better.

This is where I put mine:

http://www.bonnevilleclub.com/forum/...333&highlight=