i was refering to the 00+ model years. I cant afford to blow +$2,000 on rims and tires anyway. But if you can, thats great.

thank you...cause i could care less if they think it looks bad just wanted to know if it will fit not somones opinion on what it will look like.. again

if you go larger than stock overall diameter you may need to do some cutting, not exactly sure.

Another thing to keep in mind is if you change overall diameter you will need to reprogram the "rotations per mile" area in your PCM This will insure your speedo/odometer is still perfect.

will the check tire pressure message always be on to

Yes it will be on initially but you can hold the reset button to clear it to get used to the new rims..

I had the problem when I put on my rims which are 0.5" smaller overall diameter than the stock tires.

Its better to stay as close to 27.2" overall diameter as possible though

check out this site for calculating overall diameter with different tire sizes:

http://www.miata.net/garage/tirecalc.html

As a reference, your stock tires are 235x55x17

But if you go 22, dont waste your time with the cheap knockoffs thats what my buddy did then he put 22s on his monte carlo, hes had to replace 3 of them because they got bent.

cool do u know what offset to use

5x115mm is the bolt pattern you need...5x114.3 will work too but not be a "perfect" fit.

i have a 96 impala ss will they fit even tho their rear wheel drive

ok i know its off topic but i was reading ur sig and it says you've got lambos on the bonne ?
I need to see some pics of that

ill get some soon i just bought this computer and have nothin on it yet, if ya live near windsor ontario my boy will do them for $2000 with double pistons u can lift mine with one finger