How to...
10-20-2005, 01:27 PM
#2
DINOSAURUS BOOSTUS
Expert Gearhead
You don't need to remove the packs to clean the engine. If you are worried about them, put a plastic bag over them.
Otherwise each pack has two screws holding it on..or three bolts hold the whole tray on.
Otherwise each pack has two screws holding it on..or three bolts hold the whole tray on.
10-20-2005, 02:02 PM
#3
Senior Member
True Car Nut
Join Date: May 2003
Location: Lethbridge, Alberta, _______Canada._______ West Coast Bonneville Fest ___05,06,07 Survivor___
Posts: 8,135
Likes: 0
Received 0 Likes
on
0 Posts
all i have ever done is put a plastic grocery bag over them..keeps em dry, keeps engine running on all 6 
10-20-2005, 02:05 PM
#4
DINOSAURUS BOOSTUS
Expert Gearhead
If hosing them makes the engine studder then it'* time to look at the wires and coil packs. All should be sealed from the elements.
When I clean my engine ... everything gets a thourogh hosing.
When I clean my engine ... everything gets a thourogh hosing.
10-20-2005, 04:44 PM
#5
Senior Member
True Car Nut
Join Date: Sep 2004
Location: Fitchburg Ma _ToastedRice_
Posts: 6,837
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BillBoost37
If hosing them makes the engine studder then it'* time to look at the wires and coil packs. All should be sealed from the elements.
When I clean my engine ... everything gets a thourogh hosing.
When I clean my engine ... everything gets a thourogh hosing.
10-23-2005, 10:47 PM
#6
Senior Member
True Car Nut
Join Date: May 2003
Location: Lethbridge, Alberta, _______Canada._______ West Coast Bonneville Fest ___05,06,07 Survivor___
Posts: 8,135
Likes: 0
Received 0 Likes
on
0 Posts
I always bag mine just incase, can't hurt it if i protect it..after that i usually use an old toothbrush and some degreaser on them..i can do a better job like that anyways.
Each to his own though
Each to his own though