Seville idles @ 2500 rpm after replacing starter
Thread Starter
Junior Member
Joined: Feb 2016
Posts: 1
Likes: 0
Seville idles @ 2500 rpm after replacing starter
The pcv boots, one on each end of the pcv line were broken and I left it off. Will this cause the car to idle at high rpm'*?
Everything else was reinstalled properly...
Everything else was reinstalled properly...
Senior Member
True Car Nut
Joined: Sep 2006
Posts: 4,816
Likes: 245
From: Windsor, Ontario / Detroit, Michigan
The missing pcv hose creates a vacuum leak, and the vacuum leak causes high idle. Replace the hose and there is a good chance the idle issue will be resolved.
Thread
Thread Starter
Forum
Replies
Last Post