I have sum kind of scratchy/scrapy like noise
#21
Senior Member
Posts like a Turbo
Thread Starter
Its the noise right after the power steering pump noise! Between 25-30 seconds best heard at about 26-27/8ish seconds also kind of at (55-58 seconds)
#22
Retired
Power steering pumps are not hard to change on 3800'*. 2ea(13mm) a 5/8 line and a clamp on line.
__________________
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
#23
Senior Member
Posts like a Turbo
Thread Starter
Soooo wait its only 2 bolts & a clamp!? Really!? Would i hav to bleed the system or anything? Cuz thats my worry.. Cuz if thats te case i could. Possibly change it later today
#24
Retired
No, its not all that hard really. Just the 2 13 mm bolts you have to reach through the pulley to get to. One at 12 and one at 6 oclock position. The feed line is held in with a 5/8" and the return line is a hose clamp. Just top it off, reattach the lines, start it up, turn the wheel lock to lock several times and your done.
__________________
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
#27
Retired
Probably easier to just buy the one with the pulley already on it.
__________________
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
#28
Senior Member
Posts like a Turbo
Thread Starter
Where is that one sold? I tend to go to oreillys because there closer to my house. I just checked there site. They dont carry the one with the pully. Id prefer that one
#29
Senior Member
Most places will loan you the tool for free.....very easy to use......note how the pulley is flush with the stub shaft before removal...when you push it back on with the tool, it should be slush when done....and don't put the pulley on backwards! I have seen it done!