Cluster swap
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Mar 2010
Location: Clarksville, TN
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Cluster swap
Would swapping from this
to this
be a plug and play swap? I am sure it will bolt in no problem but do I need to add extra wiring for the extra gauges?
to this
be a plug and play swap? I am sure it will bolt in no problem but do I need to add extra wiring for the extra gauges?
#3
DINOSAURUS BOOSTUS
Expert Gearhead
Unsure, can you list the years those parts fit. On climate control, typically a manual slider or **** version can not be replaced with a fully digital because you'd need to swap all the wiring and vacuum stuff for the whole HVAC system.
#8
Member
Posts like a V-Tak
Thread Starter
Join Date: Mar 2010
Location: Clarksville, TN
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
#9
Member
Posts like a V-Tak
Thread Starter
Join Date: Mar 2010
Location: Clarksville, TN
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Here is a picture of these parts on a 97 lesabre. The 2000-up climate controls actually look almost the same as the 95-99 I am sure going dual zone would not be possible without a lot of work though. Wanted to see if I could get it automated with a thermostat.