2013 wont crank over
Thread Starter
Junior Member
Joined: Feb 2022
Posts: 1
Likes: 0
2013 wont crank over
Hi,
I disconnected the spark module so I could replace a coolant water outlet just below it. I put everything back together and I tried to start the engine and it just cranked over and then the battery died because I have the trunk open all day and the light on.
So I connected the spark module and jump the battery, when I went to crank it turned a little and stopped hard.
It seems like the timing got messed up.
Did cranking the engine with the spark control disconnected do something? If I turn the key starts to crank but then immediately stops hard, sounds like its stuck or timing is off?
I disconnected the spark module so I could replace a coolant water outlet just below it. I put everything back together and I tried to start the engine and it just cranked over and then the battery died because I have the trunk open all day and the light on.
So I connected the spark module and jump the battery, when I went to crank it turned a little and stopped hard.
It seems like the timing got messed up.
Did cranking the engine with the spark control disconnected do something? If I turn the key starts to crank but then immediately stops hard, sounds like its stuck or timing is off?
Senior Member
Posts like a Turbo
Joined: Apr 2016
Posts: 323
Likes: 136
Hi,
I disconnected the spark module so I could replace a coolant water outlet just below it. I put everything back together and I tried to start the engine and it just cranked over and then the battery died because I have the trunk open all day and the light on.
So I connected the spark module and jump the battery, when I went to crank it turned a little and stopped hard.
It seems like the timing got messed up.
Did cranking the engine with the spark control disconnected do something? If I turn the key starts to crank but then immediately stops hard, sounds like its stuck or timing is off?
I disconnected the spark module so I could replace a coolant water outlet just below it. I put everything back together and I tried to start the engine and it just cranked over and then the battery died because I have the trunk open all day and the light on.
So I connected the spark module and jump the battery, when I went to crank it turned a little and stopped hard.
It seems like the timing got messed up.
Did cranking the engine with the spark control disconnected do something? If I turn the key starts to crank but then immediately stops hard, sounds like its stuck or timing is off?
Thread
Thread Starter
Forum
Replies
Last Post
