Hello Everyone ,
Today I saw some coolant on the car carpet , under the glove box .
I think my Heater Core need to replaced .
to replace it I need to take out all the dashboard or only the glove box ?
I need to some advice or guide how to this ..

Thanks

2000-2005 Heater Core Instructions

To do this I need to remove the dashboard or only the glove box ?

Did you not read, JW'* procedure?

Today i tried to get the heater core with no successfull .
i looked for the screws that mentiond in the guide and i don't find them .
probably i need to remove the dash/metal shield .
somebody have more specific guide to this job ?

anyone ?

If the All Data instructions, are not specific enough for you, you will have to go to a Buick dealership and have them print the procedure for you....you should expect to pay a nominal fee for ink and paper...

Minimum 1 hour shop labor time to do this.

I just did this on my 04 Lesabre. Used the same guide as the link to buickforums.com that jwfirebird posted. I bought the factory workshop repair manual(10$ download online) to be sure that the forum guide was complete and it is.
That guide was difficult to follow and took a while to figure out where to start.
I have some pictures that i took while i was in there and will have to take some more in the footwells to help you out.
First of all you need special hose clamp pliers to get to the hoses off the heater core at the firewall. Astro 9409a are the decent value in these. Get the black and blue ones, they are the latest update. http://www.amazon.com/Astro-Pneumatic-9409A-Clamp-Pliers/dp/B003D3N7YW
I don't have time now but maybe in a day or two can post up the pictures.
This job was a pain and there is one screw that is so hard to get to that the factory manual says not to install it. Be ready to use at least a day on this.

Thanks ! I really appreciate that .