gxp exhaust
Senior Member
Posts like a Northstar
Joined: Feb 2003
Posts: 658
Likes: 0
From: Sacramento, CA WCBF '06, '07 survivor

take a look at this muffler
http://www.holley.com/types/Aero%20Chamber.asp
here it is on my car (5th one back)
http://s90.photobucket.com/albums/k2...rent=flyby.flv
here is the Part #: 21513HKR that my car has for the mufflers.
ROD
http://www.holley.com/types/Aero%20Chamber.asp
here it is on my car (5th one back)
http://s90.photobucket.com/albums/k2...rent=flyby.flv
here is the Part #: 21513HKR that my car has for the mufflers.
ROD
There is nothing out there as a system for the Bonneville. You have to make your own. Our car is actually pretty easy. Just lob off the OEM mufflers right where they co into the mufflers then order some Magnaflow'*. The mufflers will slip onto the OEM plumbing. You'll then need to custom bend about a foot long piece about 60* to bring the tails straight out the back of the car (as our mufflers are mounted on an angle), then choose whatever tips you like.
I chose ones similar to these on each side;
I chose ones similar to these on each side;
CMNTMXR57,
You replaced the exhaust tips on your GXP? The new ones look great! I am a fan of the stock ones as well though. Would you want to sell me the stock tips off your old exhuast?
Grant
You replaced the exhaust tips on your GXP? The new ones look great! I am a fan of the stock ones as well though. Would you want to sell me the stock tips off your old exhuast?
Grant
Thread
Thread Starter
Forum
Replies
Last Post
Charlie
Performance, Brainstorming & Tuning
29
Aug 9, 2004 10:03 PM




