Quick question, installing an aftermarket deck in my SSEi...

How do I get the dash trim off? And how do I remove the stock deck once the trim is gone, do I need a special tool?

Thanks in advance...

The panel carefully pops off. I don't know what size, but a small nut driver will remove the three screws holding the stereo in

http://www.carstereohelp.com/stereor...Bonneville.htm

Hey, that'* a great site MOS.

You can use either 9/32" or 7mm to remove the 3 screws that hold the radio in.

THAT IS A LEATHER BENCH in that 92!!!!!!!!!!!!!!!!!!!!!!!!!!!!!, you dont see that too often

this is for the 92+ with the buckets and center console

http://www.carstereohelp.com/stereor...onneville1.htm

Awesome thanks guys!

How hard can I pry on that panel? It'* on there pretty good :?

Try pulling the panel. Then wherever you see the panel sticking to the car, look around there for clips, and focus your prying effort on those clips. There are like 5-6 of them. If you have a column shifter, you will most likely have to put the car into 3rd, so you can remove the piece safely from the dash.

It'* a console, but thanks! Project for tomorrow! :P