Finally got the speaker mounts for the rear.. and had the HU already wired in.. but now I don't remember which color wires for the rear speaker is (+) or (-) ( left and right )..

HELP !!!

I don't know if Pontiac changed the colors or not, but on my 2000 rear L+ is brown/white, L- is brown... rear R+ is dark blue, R- is black.

Mine are different than your 00. I will have to get back to you on which is negative and positive though. What colors do you have?

last I checked.. blue and dark blue on left rear.. and can't remember right rear.. think it was brown and yellow??



I picked up a 93 rear speaker mounts.. it mounts up.. but there'* a gap between the speaker mounts and the frame (I can push the speaker/mounts side to side.. but it'* secured.. think I'm going to put some foam insulation or dynamat or something to seal it up.. but just wanted to know if anybody elses did that )

Here you go...I got these from Silver96 a long time ago hope it helps

The wires to use for the sub from the 6X9'* are:
blue & white + from the left
green & black - from the left
dark green + from the right
blue & black - from the right
These are the subwoofer wires. The other 4 wires are for bass/ midrange to the 6X9.

That means I have them hooked up wrong? I remember blue and dark blue right and brown and yellow for left.. err... guess I will have to look into it later.. ( the speaker work though )

I just put a 93 speaker mount on and notice there'* lots of room and gap and a bit of a swivel between the mount and the frame.. so I put some rolled up kleenax there for now till I get some time to put dynamat ( whats compareable? I remember reading about it.. but don't remember now *that you can pick up from home depot*) to cover up the gaps