Make it simple
02-03-2005, 12:50 AM
#1
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Jan 2005
Location: Bloomington, IL
Posts: 282
Likes: 0
Received 0 Likes
on
0 Posts
Make it simple
Trying to make it simple whenever I bust out the 1/0 amp kit this weekend and install it. I have a 96 bonneville ssei... i know getting this through the firewall is going to suck, but i'm looking forward to it. any suggestions on where to try to get it through? or how about safe places to drill (if i have to)
thanks in advance
-adam
thanks in advance
-adam
02-03-2005, 10:23 AM
#3
Senior Member
Certified Car Nut
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes
on
0 Posts
i just did it with a 2/0 gague, you need to drill. if you need a spot I found a PERFECT place. Im going to be doing an extensive picture write up, for a full out install
02-03-2005, 11:39 AM
#4
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Jan 2005
Location: Bloomington, IL
Posts: 282
Likes: 0
Received 0 Likes
on
0 Posts
well that'd be excellent. unfortunately i'm going to need it done this weekend because i have to demo my old subs and amp to a guy who wants to buy them. ahhhhhh
i'll just talk to the installers that i work with and they will help me out. but pics would be grrrrrrrrrreat
-adam
i'll just talk to the installers that i work with and they will help me out. but pics would be grrrrrrrrrreat
-adam
02-03-2005, 12:03 PM
#6
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Jan 2005
Location: Bloomington, IL
Posts: 282
Likes: 0
Received 0 Likes
on
0 Posts
sure thing. looks pretty straight forward. never did this before, i'm ok with running wires from cab to trunk... but i hate under the hood. hahaha
thanks!
-adam
thanks!
-adam
Thread
Thread Starter
Forum
Replies
Last Post
ddalder
Audio (and aftermarket electronics)
17
01-30-2008 01:45 AM
Kuhl
Performance, Brainstorming & Tuning
7
05-22-2003 07:03 PM
