Si i just got 2 polk dxi 460 p speakers an d was installing them last night when i realized that my left one is too deep to fit. The bow that holds my gauges sticks about 2 in into the speaker slot. Anyideas on how to make it fit? Could i just cut
The box or raise them up.

can u get a pic or two to show us?

is it possible to use washers to raise the speaker up to clear the gauge cluster and still replace speaker grill? if not, using a dremel to remove some plastic from the gauge "box" should be fine, just be careful of any wires, or gauge mechanisms

I can get a pic sometime tonight. Right now my dad is driving it so i can get one up at like 830. And i dont know if i can raise it enough and not have it stick out.

They have speaker risers, but 2" is a lot to come up. You may want to see if you can find some shallower speakers.

and send me ur Polks, I need new 4x6'*

Sounds like you should find him a set of shallows and propose a swap = P

TOM! I was trying to get a set of freebies! LOL, J/P

I want to get some polks in a really bad way.

Wow you guys sound like a couple of beggers gonna scare him off

Yes im with tommy i would try to find some shallower speakers as you dont want them sticking up two inches IMO it will look weird and you realllyyy DONT want to cut into the back side of the guage housing.