Audio (and aftermarket electronics) This is your place for alarms, remote starters, to brag about your system, exaggerate your db levels, or simply ask questions for stock or aftermarket audio. No Flames! (except from roasted amps)

installing subs using the gain control

Thread Tools
 
Search this Thread
 
Old 07-27-2004, 07:24 PM
  #11  
Senior Member
True Car Nut
 
randman1's Avatar
 
Join Date: Feb 2004
Location: Western MA
Posts: 2,708
Likes: 0
Received 2 Likes on 2 Posts
randman1 is on a distinguished road
Default

Originally Posted by Drifter420
So then would he need to know which color wiring powers the woofer or 2nd voice coil? Or are they just full ranged and a capacitor style cross over is soldered onto the stock speaker leads??
The output should be full range and the passive type crossover (caps and inductors) used. The wires that were connected to the tweeter part would connect to the aftermarket 6x9s and the wires that were connected to the woofer part will be the high level input to the amp.

You did bring up a good point that I did not consider. You will want to eliminate any type of component that will limit the range to the 6x9s by removing the capacitor or whatever else might be in line.
Old 07-27-2004, 09:07 PM
  #12  
Senior Member
True Car Nut
 
fuddyduddy121's Avatar
 
Join Date: Sep 2002
Posts: 3,392
Likes: 0
Received 0 Likes on 0 Posts
fuddyduddy121 is on a distinguished road
Default

http://www.bonnevilleclub.com/forum/...pic.php?t=4854
Old 07-28-2004, 10:00 AM
  #13  
Member
Posts like a V-Tak
Thread Starter
 
miketa's Avatar
 
Join Date: Jun 2003
Location: WIndsor, Ontario
Posts: 59
Likes: 0
Received 0 Likes on 0 Posts
miketa is on a distinguished road
Default

Thanks fuddydaddy...I knew it was discussed before but couldn't find it ...thanks.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
gary0326
Audio (and aftermarket electronics)
4
12-19-2009 01:27 PM
reservoirdog6991
Audio (and aftermarket electronics)
1
11-20-2006 02:32 PM
miketa
Audio (and aftermarket electronics)
11
08-18-2004 10:39 AM
Glasuan
Audio (and aftermarket electronics)
3
10-05-2003 04:49 PM
danpuzak
Audio (and aftermarket electronics)
2
10-03-2003 12:15 PM



Quick Reply: installing subs using the gain control



All times are GMT -4. The time now is 01:19 AM.