hu mount
Senior Member
Posts like a Camaro
Joined: Apr 2005
Posts: 1,071
Likes: 0
Originally Posted by bonnie94ssei
Unrelated:
That mount is also different from mine...I had an opening in top where the mini lamps should be with a red piece of plastic covering it.
That mount is also different from mine...I had an opening in top where the mini lamps should be with a red piece of plastic covering it.
Senior Member
Certified Car Nut
Joined: Oct 2002
Posts: 11,308
Likes: 2
Rick, do you have mini lamps or LEDs?
Also, you will just have to do is what I did...which is making it so the entire radio does not go into the mount all the way. I cut some plastic strips and put them inside the mount so that when you slide the radio in it, it is pushed out forward a little bit. That should solve all your problems.
Also, you will just have to do is what I did...which is making it so the entire radio does not go into the mount all the way. I cut some plastic strips and put them inside the mount so that when you slide the radio in it, it is pushed out forward a little bit. That should solve all your problems.
Thread Starter
Senior Member
Posts like a Turbo
Joined: Dec 2006
Posts: 386
Likes: 0
Pete it has mini lamps .. stock that came with the mount.
i cant see the pics here at work but i did that ..
one pic shows the entire thing put together with everything on.. the radio faceplate is really tight when the deck is moved forward in the mount to allow removable face to snap on.
even the slight thickness of the aluminum humount faceplate is too much .. again the detachable radio faceplate will snap on.. but way too tight...
i cant see the pics here at work but i did that ..
one pic shows the entire thing put together with everything on.. the radio faceplate is really tight when the deck is moved forward in the mount to allow removable face to snap on.
even the slight thickness of the aluminum humount faceplate is too much .. again the detachable radio faceplate will snap on.. but way too tight...
Thread Starter
Senior Member
Posts like a Turbo
Joined: Dec 2006
Posts: 386
Likes: 0
just got an email reply from mark at humount..
i sent him pics with measurements and he has made me a different faceplate.
minus the supercharged writing that will fit my deck/faceplate. still says bonneville ssei
and he did not mention any charge
i sent him pics with measurements and he has made me a different faceplate.
minus the supercharged writing that will fit my deck/faceplate. still says bonneville ssei
and he did not mention any charge
Senior Member
Posts like a Northstar
Joined: Dec 2006
Posts: 635
Likes: 0
From: Niagara Region, ON, Canada
Hmm,
My install was a bit tricky too.
I had to cut the white portion of the bracket a bit wider using a utility knife, then the metal bracket finally slid in. I then bolted the black plate on, and voila.
There is a little gap at the top of the radio, but over all it'* cool as the red light shines down on top of the radio.
The little lights are a pain if a bunch are burnt out. LED is the way to go!
Good luck, Rick.
Post some finished / installed pics please.
Adam
My install was a bit tricky too.
I had to cut the white portion of the bracket a bit wider using a utility knife, then the metal bracket finally slid in. I then bolted the black plate on, and voila.
There is a little gap at the top of the radio, but over all it'* cool as the red light shines down on top of the radio.
The little lights are a pain if a bunch are burnt out. LED is the way to go!
Good luck, Rick.
Post some finished / installed pics please.
Adam
