So i have a 1997 Bonneville SE, which before I bought, i tried to confirm online. Seemed to me that keyless entry was standard on all 97 models from all I could find online. So i bought the car despite them not having a transmitter (bought from dealer, car was traded with no transmitter). I bought one on Ebay that says it will work for 97, 98, and 99 bonnevilles and came with the programing instructions (jumper pin 8 and 4 procedure). Trouble is, i have a pin 4, but no pin 8!!! I looked at the RPO sticker and did not see the AOU code. am I out of luck with this? Was keyless entry standard on the bonneville in 97, I figured that since I have the power trunk button and lockout in the trunk that I should have keyless entry......

how did you go about installing it, did you wire in the factory keyless? I went to the junkyard today for some misc. trim pieces, and found a few SSE bonnevilles that might still have the theft thingy in them. What would I need to do to get this setup? Its either that or I buy a cheapy aftermarket one, Best Buy will sell me one (a Viper) and install it for 130 plus tax out the door, but without the trunk pop (already have power trunk release).

It can operate the remote trunk release, but i have to buy another module, itsl ike 10 bucks, plus 35 to install it. I've never messed with an aftermark alarm system, so I don't know what that $35 entails labor wise. The part itself is $10, maybe its a solenoid and I don't need it cause i already have factory power trunk release.
anyways, this is the 211HV model from Viper, and it can control 2 auxillary options, though not sure what has to be added to run these. One of these options is "Progressive door unlock" but it says additional hardware and installation is required for that. Anyone had any experience with this setup and adding onto it?