GXP Audio (install pics added) updated pics pg2
#1
Senior Member
True Car Nut
Thread Starter
Join Date: Sep 2006
Location: Somewhere south of Ottawa with your girlfriend driving faster then you.
Posts: 3,277
Likes: 0
Received 0 Likes
on
0 Posts
GXP Audio (install pics added) updated pics pg2
Well its ordered...
Instead of going with the AVN 5495 I went with the avn 5435
and Massive Components
CK 6x9 STAGE2
6x9 in. 2-way Coaxial/Component Speakers :: 130 Watt RMS / 280 Watt Max.
for the rear deck
for the doors
I will also be putting in 3 sets of tweeters 1 for the rear and 2 sets up front.
and
400 4 channel I might add a second 200.2 ? for the rear deck i don't know opinions ???
and when And if i build a box
12 in. Cast Basket Subwoofer.
Basket: Heavy Powder Coated Cast Alum. Basket.
Magnet: Double Stack 200oz Ferrite Magnet.
Motor: Chrome Plating On Both Top and Bottom Plates.
Cooling: Custom Design Hyper Ventilation Design On 30mm Thick Top Plate.
Re-Cone: Custom Design Re-Movable Gaskets.
Cone: Custom Design Light Weight, Thick Woven Carbon Fiber Cone.
Surround: Custom Design 1" Tall Foam Surround.
Spider: Custom Design Double Laminated Spider With Woven Tinsel Leads.
Voice Coil: Custom Design 3"-Quad 1 Ohm Alum. Wire On Thick Black Alum. Former.
Dust Cap: Custom Design Light Weight, Thick Woven Carbon Fiber Dust Cap.
Instead of going with the AVN 5495 I went with the avn 5435
and Massive Components
CK 6x9 STAGE2
6x9 in. 2-way Coaxial/Component Speakers :: 130 Watt RMS / 280 Watt Max.
for the rear deck
for the doors
I will also be putting in 3 sets of tweeters 1 for the rear and 2 sets up front.
and
400 4 channel I might add a second 200.2 ? for the rear deck i don't know opinions ???
and when And if i build a box
12 in. Cast Basket Subwoofer.
Basket: Heavy Powder Coated Cast Alum. Basket.
Magnet: Double Stack 200oz Ferrite Magnet.
Motor: Chrome Plating On Both Top and Bottom Plates.
Cooling: Custom Design Hyper Ventilation Design On 30mm Thick Top Plate.
Re-Cone: Custom Design Re-Movable Gaskets.
Cone: Custom Design Light Weight, Thick Woven Carbon Fiber Cone.
Surround: Custom Design 1" Tall Foam Surround.
Spider: Custom Design Double Laminated Spider With Woven Tinsel Leads.
Voice Coil: Custom Design 3"-Quad 1 Ohm Alum. Wire On Thick Black Alum. Former.
Dust Cap: Custom Design Light Weight, Thick Woven Carbon Fiber Dust Cap.
#2
Senior Member
Posts like a Northstar
Join Date: Mar 2007
Location: Maumee, OH
Posts: 529
Likes: 0
Received 0 Likes
on
0 Posts
I woulda just stuck with stock or something much less than components in the rear. Remember, anything in front of your ears is Stereo, anything behind is Mono(just rear fill more or less).
Otherwise, Massive is good stuff!!!
Otherwise, Massive is good stuff!!!
#3
Senior Member
True Car Nut
Thread Starter
Join Date: Sep 2006
Location: Somewhere south of Ottawa with your girlfriend driving faster then you.
Posts: 3,277
Likes: 0
Received 0 Likes
on
0 Posts
yeah but everything in the car is Monsoon so...... its gotta go...
so that means
2 front doors
2 rear doors
rear deck
and 2 tweeters
Stock
so that means
2 front doors
2 rear doors
rear deck
and 2 tweeters
Stock
#4
Senior Member
Posts like a Northstar
Join Date: Mar 2007
Location: Maumee, OH
Posts: 529
Likes: 0
Received 0 Likes
on
0 Posts
Ah..... well be sure to not focus the sound in the rear!
What I do when I'm doing a full set-up and come time to tune, start from the front and work my way back. I do the sub last.
What I do when I'm doing a full set-up and come time to tune, start from the front and work my way back. I do the sub last.
#5
Senior Member
True Car Nut
Thread Starter
Join Date: Sep 2006
Location: Somewhere south of Ottawa with your girlfriend driving faster then you.
Posts: 3,277
Likes: 0
Received 0 Likes
on
0 Posts
right but im not putting subs in....... Yet because i'm not in the position to give up my trunk space. so I'm going to build a box that lets me keep as much open space in the trunk as possible likely use up the sides. But i wont have the time to build that for a few months
#6
Senior Member
True Car Nut
Join Date: Jun 2004
Location: Rochester, NY (college)
Posts: 6,182
Likes: 0
Received 0 Likes
on
0 Posts
so how much were they.
personally I would not install the rear tweeters. Although I probably wouldn't install rear speakers at all, but definately not the tweeters
personally I would not install the rear tweeters. Although I probably wouldn't install rear speakers at all, but definately not the tweeters
#8
Senior Member
True Car Nut
Thread Starter
Join Date: Sep 2006
Location: Somewhere south of Ottawa with your girlfriend driving faster then you.
Posts: 3,277
Likes: 0
Received 0 Likes
on
0 Posts
I'm going to run the Eclipse 5435 CD,DVD,Nav unit 6.5 inch touch screen
So far cost is around 2000.00
900.00 HU
210.00 comps
210.00
210.00
400.00 amp
So far cost is around 2000.00
900.00 HU
210.00 comps
210.00
210.00
400.00 amp
#10
Senior Member
True Car Nut
Thread Starter
Join Date: Sep 2006
Location: Somewhere south of Ottawa with your girlfriend driving faster then you.
Posts: 3,277
Likes: 0
Received 0 Likes
on
0 Posts
you really think so ??? if im trying to achieve true surround sound wouldn't I keep them??
It'* not really a issue of cost at this point just trying not to give up my trunk space. Like i said when I get the time I might build a sub enclosure that allows me to atleast fit a hockey bag in there with out a fight.
But depending on how it sounds with just the components I might not bother. :? :? :?
I'm really thinking about running the rears off of there own amp tho.
It'* not really a issue of cost at this point just trying not to give up my trunk space. Like i said when I get the time I might build a sub enclosure that allows me to atleast fit a hockey bag in there with out a fight.
But depending on how it sounds with just the components I might not bother. :? :? :?
I'm really thinking about running the rears off of there own amp tho.