will a Double DIN setup fit into my 1993 SE stereo slot? i no the hole is bigger, which is why it requires more mounting brackets but is it big enough to house it?

any custom mods to the trim do you think?

http://www.bonnevilleclub.com/forum/...&highlight=dvd

Cut, cut, cut... sand, sand, sand... etc. It'* been done before.

http://www.bonnevilleclub.com/forum/...ic.php?t=26657

You're on the ball today young man. You beat me to it.

take into consideration though, that i have an SE.. the dash stops and i have a bench seat. still the same sized hole to pop it in?
+ theres not too much to sand off of my trim.. maybe 1/4 inch or so on the bottom. will the actual hole in the dash be big enoughto pop it in tho or are we talkin about cutting a bigger hole in the dash itself?

ooooo you are going to have a problem....i think that the design of your dash will not allow you to do the double din.......

what about a regular HU with a screen underneath since you have the room

[quote=" ooooo you are going to have a problem....i think that the design of your dash will not allow you to do the double din.......

what about a regular HU with a screen underneath since you have the room[/quote]

-- well thats gonna be a difference of hundreds of dollars.. im jus thinkin about sellin my 1din kenwood, which i do love, and goin for a 2din .. cost about an aextra 150 or so after i sell my old one.. just an idea but i figured id run it by the finest first

I had to add material to the sides of the dash trim as it was too wide for the 2 DIN radio. The radio was about 3/4" narrower so about 3/8" was added to each side. If you had to enlarge the bottom of your trim piece and retain the same width, I think you'd run out of room. But since it'* narrower, I still think it could be done.