center stack removal
#1
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Sep 2004
Location: The Bluegrass State
Posts: 522
Likes: 0
Received 0 Likes
on
0 Posts
center stack removal
Its the mac,
I'm going to be getting an alpine headunit and I prefer to do the install myself. How do I go about getting the trim panel off the center stack. I've looked at some pix. and it seems the **** will have to come off the shifter also. I know about the install kit and having to have one. Does the panel just pop out like most or what??
Need help
I'm going to be getting an alpine headunit and I prefer to do the install myself. How do I go about getting the trim panel off the center stack. I've looked at some pix. and it seems the **** will have to come off the shifter also. I know about the install kit and having to have one. Does the panel just pop out like most or what??
Need help
#2
Senior Member
Certified Car Nut
You don't need to take off the shift ****. Just turn the key and put the shifter in 1. Gives plenty of room. Don't forget the parking brake. The trim panel does pop off. You just gotta tug to see where the thing is attached, then pry with a long screwdriver. Remember the trim panel is one piece to the othe side of the steering wheel.
#3
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Sep 2004
Location: The Bluegrass State
Posts: 522
Likes: 0
Received 0 Likes
on
0 Posts
cetner stack removal
Thanks for the info.
I just went to carstereo help.com and looked up my year for removal. It says something about "dock and lock" how will that affect the new headunit can I just by a new wiring harness??
Thanks again
Mac
I just went to carstereo help.com and looked up my year for removal. It says something about "dock and lock" how will that affect the new headunit can I just by a new wiring harness??
Thanks again
Mac
#4
Senior Member
Posts like a Camaro
Join Date: Aug 2004
Location: Boca Raton, FL
Posts: 1,101
Likes: 0
Received 0 Likes
on
0 Posts
there are 2 pins upbove your steering wheel & gauges. take a small phillips screw driver or something with a point tip and push them up -->http://www.angelfire.com/fl5/itsnitr...album?i=11&*=1
than once you get the panel off and you can see the raido has four clips
-->http://www.angelfire.com/fl5/itsnitr...album?i=12&*=1
inorder for you to keep all of ur things working and to install an aftermaket radio you will need this
http://www.crutchfield.com/*-aXLB0ge...&avf=N&search=
than once you get the panel off and you can see the raido has four clips
-->http://www.angelfire.com/fl5/itsnitr...album?i=12&*=1
inorder for you to keep all of ur things working and to install an aftermaket radio you will need this
http://www.crutchfield.com/*-aXLB0ge...&avf=N&search=
Thread
Thread Starter
Forum
Replies
Last Post
ShadeTree
Buick
0
04-11-2015 11:51 AM