ahhhhh rattling
Senior Member
Posts like a Turbo
Joined: Jan 2005
Posts: 282
Likes: 0
From: Bloomington, IL
Originally Posted by corvettecrazy
-adam
Senior Member
True Car Nut
Joined: Apr 2004
Posts: 4,879
Likes: 6
From: Three Oaks, Michigan
The weather stripping is the best answer. But get something good. Or perhaps get some 1/4-1/2" foam at Wal-Mart or something.. that may do the trick too. Just something to keep pressure on the door panel.
-justin
-justin
Senior Member
Posts like a Turbo
Joined: Dec 2003
Posts: 248
Likes: 0
From: INDIANA
the problem is the speakers are mounted to the door panel. this is bad for sound and rattles like hell. the problem is that the doors do not have a inner lining of metal. it is just thick plastic. i cut this back where the speakers where going. i dynamated the outer skin and then made a inner panel with wood. i cut the hole for the speaker then covered the whole inner door with dynamate. i also put the dynamate sound absourber behind the speakers to cancel the rear wave from the speaker. this set up rocks and does not rattle at all.
Senior Member
True Car Nut
Joined: Jun 2004
Posts: 6,182
Likes: 0
From: Rochester, NY (college)
Originally Posted by sdowney
the problem is the speakers are mounted to the door panel. this is bad for sound and rattles like H***. the problem is that the doors do not have a inner lining of metal. it is just thick plastic. i cut this back where the speakers where going. i dynamated the outer skin and then made a inner panel with wood. i cut the hole for the speaker then covered the whole inner door with dynamate. i also put the dynamate sound absourber behind the speakers to cancel the rear wave from the speaker. this set up rocks and does not rattle at all.
Thread
Thread Starter
Forum
Replies
Last Post