Is this a wheel bearing? or what?
Guest
Posts: n/a
The nut takes a 34mm socket which you can get at most auto parts stores. As mentioned, the others are pretty standard metric stuff that come off pretty easily. I used a puller and some PB Blaster to separate the splines from the bearing assembly.
Senior Member
Posts like a Turbo
Joined: Jan 2006
Posts: 255
Likes: 0
From: Brighton, Michigan
So the bearing can get stuck on these axles, too?
Of course you can "buy" the puller and socket from Murray'* or AZone, and you can return them when done. Not positive about the socket. I usually just keep the socket.
Of course you can "buy" the puller and socket from Murray'* or AZone, and you can return them when done. Not positive about the socket. I usually just keep the socket.
Thread Starter
Member
Posts like a V-Tak
Joined: Oct 2004
Posts: 89
Likes: 0
From: Cleveland to Hotlanta
Today I had the bearing changed, and voila! no more hum.
Thank you all for your input! Lesson learned here for me is to trust my own instincts, and trust you guys.
Thank you all for your input! Lesson learned here for me is to trust my own instincts, and trust you guys.
Thread
Thread Starter
Forum
Replies
Last Post