Oil filter - Intense's offering
Thread Starter
Senior Member
True Car Nut
Joined: Sep 2002
Posts: 4,013
Likes: 0
From: Genoa, Illinois
Oil filter - Intense'* offering
For years I've been using the AC Delco PF47 on all my 3800'*, but why does Intense offer the PF52? http://www.intense-racing.com/Mercha...roduct_Count=1
Was gonna tack on a little something to an order and I saw this and it confused me.
Was gonna tack on a little something to an order and I saw this and it confused me.
RIP
True Car Nut
Joined: Jul 2004
Posts: 5,656
Likes: 4
From: Grand Rapids, Mi
This will give you an idea of how it fits, although due to the angle needed to take the picture, it shows a little lower than it actually is. I run that size on my car.
http://www.bonnevilleclub.com/forum/...=article&k=106
http://www.bonnevilleclub.com/forum/...=article&k=106
Junior Member
Joined: Jun 2002
Posts: 0
Likes: 0
I like the idea of the larger capacity oil filter and I have tried it once but every time I looked under there and saw it peeking out hanging low I worried about it.
I suppose it depends a lot on the conditions of your roads.
We have some rough ones around here and when I travel away from home I don't want to take chances on hitting road debris. It wouldn't take much to punch a small hole and then......
I suppose it depends a lot on the conditions of your roads.
We have some rough ones around here and when I travel away from home I don't want to take chances on hitting road debris. It wouldn't take much to punch a small hole and then......
DINOSAURUS BOOSTUS
Expert Gearhead
Joined: Mar 2005
Posts: 41,391
Likes: 30
From: Enfield, CT
Hopefully these out of car and same angle pics help you further. There'* very little difference in the amout the filter hangs down. You'll scrape your front bumper cover long before you bottom out the oil filter.
PF52 Sized Filter
PF47 Sized Filter
PF52 Sized Filter
PF47 Sized Filter
Junior Member
Posts like a Ricer Type-R
Joined: Aug 2002
Posts: 11
Likes: 13
A stone shield would help for the small stuff for sure. I've considered it myself, as the 'dangle angle' of the S1 is a bit more exposed with a bigger filter.
The filter I run is both larger in diameter and longer than a stock filter.
The filter I run is both larger in diameter and longer than a stock filter.
Originally Posted by willwren
A stock PF47 (OEM) filter is roughly 3" long by 2.75" in diameter.
A K&N HP2001 (sold at INTENSE among other places) is roughly 5" long by 3" diameter.
Forgive me for the angles, I needed another person to shoot these pics:
Bottom line is that it IS exposed. There is a chance you could take this sucker out with a road hazard or a deep pothole.
I'll probably fashion some sort of skid plate for this one when it goes in. But in the long run, the Zilla isn't a daily driver except in the late spring-early fall timeframe. Not much inclement weather or bad conditions.
For most 87-99'* here? Probably not a great idea.
A K&N HP2001 (sold at INTENSE among other places) is roughly 5" long by 3" diameter.
Forgive me for the angles, I needed another person to shoot these pics:
Bottom line is that it IS exposed. There is a chance you could take this sucker out with a road hazard or a deep pothole.
I'll probably fashion some sort of skid plate for this one when it goes in. But in the long run, the Zilla isn't a daily driver except in the late spring-early fall timeframe. Not much inclement weather or bad conditions.
For most 87-99'* here? Probably not a great idea.
