new bonneville with some issues
I picked up a 2000 SE pretty nice car so far. I has leather, performance ratio axle, cd player etc.
within the last week the rear window on the pass side will not go back up, it will go down only. I tried to grab and pull it while pressing the up button with no luck.
the steering wheel make a weird noise when Im parking the car only like a loud grind.
the oil pressure is pegged to the right at 120psi and will not move
other than that it runs good
had a tranny replaced and LIM done at the dealer ship had some paper to prove it.
where can I get a cheap window regulator and oil pressure sending unit and how do I replace these myself?
the shaft I will take to local mechanic.
within the last week the rear window on the pass side will not go back up, it will go down only. I tried to grab and pull it while pressing the up button with no luck.
the steering wheel make a weird noise when Im parking the car only like a loud grind.
the oil pressure is pegged to the right at 120psi and will not move
other than that it runs good
had a tranny replaced and LIM done at the dealer ship had some paper to prove it.
where can I get a cheap window regulator and oil pressure sending unit and how do I replace these myself?
the shaft I will take to local mechanic.
Window regulator fix.
http://www.bonnevilleclub.com/forum/...e=article&k=26
Intermediate shaft lube/replacement
http://www.bonnevilleclub.com/forum/...=article&k=111
Can check RockAuto for the oil pressure sender.
http://www.bonnevilleclub.com/forum/...e=article&k=26
Intermediate shaft lube/replacement
http://www.bonnevilleclub.com/forum/...=article&k=111
Can check RockAuto for the oil pressure sender.
Replacing the oil pressure sender should only take 30 mins. of so.
I ordered mine from Rockatuo.com for $30
1. Remove passnger tire
2. Drain Oil
3. Remove Oil Pressure Sender
4. Reverse Process
My old oil pressure sender fell into two pieces when I took it out. No wonder it didn't work.
You need an abnormal socket to get the oil pressure sender off, unless you have some kind of crescent wrench.
I ordered mine from Rockatuo.com for $30
1. Remove passnger tire
2. Drain Oil
3. Remove Oil Pressure Sender
4. Reverse Process
My old oil pressure sender fell into two pieces when I took it out. No wonder it didn't work.
You need an abnormal socket to get the oil pressure sender off, unless you have some kind of crescent wrench.
Originally Posted by Archon
Window regulator fix.
http://www.bonnevilleclub.com/forum/...e=article&k=26
Intermediate shaft lube/replacement
http://www.bonnevilleclub.com/forum/...e=article&k=26
Can check RockAuto for the oil pressure sender.
http://www.bonnevilleclub.com/forum/...e=article&k=26
Intermediate shaft lube/replacement
http://www.bonnevilleclub.com/forum/...e=article&k=26
Can check RockAuto for the oil pressure sender.
Thread
Thread Starter
Forum
Replies
Last Post
leftd90
Audio (and aftermarket electronics)
14
Mar 15, 2007 02:22 PM
TJ'sblackbonne
General GM Chat
27
Dec 22, 2006 02:00 PM
2000SilverBullet
Your Other Rides: Pics & Videos
6
Jul 2, 2006 02:44 AM




