Looks like mine needs replaced. Anyone have a part number for this, and is it very hard dto change out? (directions?).

Isn't this the one everyone is changing to solid?

Maybe, don't know.

We need the Bullet and Pdad on this one.

That'* the one they're making solid.

http://www.bonnevilleclub.com/forum/...hlight=#146695

I saw the Bullet'* first-hand. Looks very good. I didn't poke around Pdad'* enough to see it.

Yup you want the solid motor mount, SilverBullet made his out of aluminum and I made mine out of alumized wear plastic with top and bottom urethane bushings. I also used 3" cup washers. No regrets after 3000 miles.
I'll try and get a pic this evening.

It'* about time :P

Cheers,

Hum, mine needs replacing too.

Any of you guys feel a vibration in the gas pedal like Todd and I do during spirted driving?

My car is actuall at the dealer right now, for that problem and few other small things, let you know what they find.

Heres a pic of my mount and a recent pic of the engine bay. The mount is easy to make and cost very little. No need to jack the engine up or use jack stands, just remove the mount off the engine (you can see 2 bolts in the upper right) and the bottom nut below the cross brace the mount sits on.



I'll have the cai done soon, week or two.