foggy light covers
Thread Starter
Junior Member
Posts like a Ricer Type-R
Joined: Nov 2009
Posts: 17
Likes: 0
From: West Warwick R.I.

Hello again as I am not very knowledgable about cars I am glad to have found this place I have already gotten help for my windows. I have another possibly stupid question the covers for my front lights are very foggy, Is this ordinary? Or should I do something about it?
they make a buffing compound and a buffing wheel u install in a power drill but if u want to go the cheap route and dont mind using a little elbow grease u can also use a tooth brush
A buffing will be necessary, depending on how bad it is. I've seen great results from some high grit wet sanding, then buffing with a buffing wheel as mentioned above. If they're not that bad, you can make some slight improvements with a lens polishing compound that you can get at any auto store.
If its really bad, you'll need new lenses.
If its really bad, you'll need new lenses.
Thread
Thread Starter
Forum
Replies
Last Post
nickycarts
Detailing & Appearance
6
Jan 21, 2007 07:54 PM



