fog light keeps burning out
Thread Starter
Senior Member
Posts like a Northstar
Joined: Feb 2007
Posts: 657
Likes: 0
From: Starbuck, Manitoba Drving the Batmobile

My driver side for light keeps burning out on my 02 se. I've replaced it twice in the past 4 months. What would be causing this? (just to let you know I never touch the light with my bare hands when installing it. nor never touch the actual glass of the bulb)
Thread Starter
Senior Member
Posts like a Northstar
Joined: Feb 2007
Posts: 657
Likes: 0
From: Starbuck, Manitoba Drving the Batmobile

i'm running silverstars already. The thing is they shouldn't burn out after 2 months. My passenger side is still going strong. It'* just the driver side keeps burning out. and silverstars aren't cheap her. $26 each
Senior Member
True Car Nut
Joined: Jan 2005
Posts: 3,882
Likes: 2
From: Montevideo, MN MWBF '05, '06, '07 WCBF '06 '07 survivor

try putting a little dab of dielectric on the contacts, not a lot. If you changed the whole assemble you might have better luck. I stopped putting bulbs in the 92, they would never last. In the 97, they never burn out. Go figure.
Originally Posted by ChilinMichael
I may be wrong, but I could have sworn I've seen posts related to the issue that silver star'* don't last in the fog lights for some odd reason... I'd do a search.
I've used the Silverstar a few times & never will again, they never last more than a few months.
As for yours burning out on one side only. Check the voltage of each side with a multi meter. It'* not very common but you could be getting move voltage to the driver side for some reason & burning it up sooner.
As for yours burning out on one side only. Check the voltage of each side with a multi meter. It'* not very common but you could be getting move voltage to the driver side for some reason & burning it up sooner.


