Rear windows and locks won't work
#1
Junior Member
Thread Starter
Join Date: May 2015
Location: Crown Hill West Virginia
Posts: 7
Received 0 Likes
on
0 Posts
Rear windows and locks won't work
My 2002 Pontiac Bonneville rear windows and locks don't work. I fixed the wire under the seat and I replaced the left rear door module and the master driver door switch also I'm getting power and ground to the rear door module but they still won't work help please and thank you
#2
Retired
Which switch are you using to lock the rear door? The driver master or the rear door?
__________________
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
The following users liked this post:
rebelrider (05-23-2015)
#4
Retired
If you are using the left front door to control the windows and they don't respond, but if the rear door switch works, then its the master module in the drivers door. Or a broken link between the left front door and the other doors.
__________________
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
The following users liked this post:
rebelrider (05-23-2015)
#7
Retired Administrator
True Car Nut
There are multiple locations to have to fix under the carpet, I think you may have found and cleaned one location, but you have another location with corrosion under the drivers seat carpet. Pull the seat out again, you may have to cut some of the carpet to do proper inspection. Take your time, I think you will find the corrosion in a second junction point under the carpet.
There is a picture in this thread that can show a corrosion point:
https://www.gmforum.com/2000-2005-90...-water-301873/
There is a picture in this thread that can show a corrosion point:
https://www.gmforum.com/2000-2005-90...-water-301873/
The following users liked this post:
rebelrider (05-23-2015)
#8
Junior Member
Thread Starter
Join Date: May 2015
Location: Crown Hill West Virginia
Posts: 7
Received 0 Likes
on
0 Posts
Thanks gun I will check it again but I am getting power and ground to the rear door module'* there is two sets of wires going to the rear door module and both sets are getting power and ground
Thread
Thread Starter
Forum
Replies
Last Post
bjkindle
Everything Electrical & Electronic
2
08-10-2009 08:07 AM
sonoma_zr2
Everything Electrical & Electronic
4
08-23-2006 04:06 PM