Best brand of intake gaskets?
Thread Starter
Member
Posts like a V-Tak
Joined: May 2003
Posts: 34
Likes: 0
Best brand of intake gaskets?
I`m installing a Dorman manifold on a 2001 Pontiac and was wondering what your recommendations are for upper and lower gaskets. Stock? Fel Pro? Victor? Something else? Also, Anything else I should change while I`m in there?
Senior Member
True Car Nut
Joined: Jun 2004
Posts: 6,182
Likes: 0
From: Rochester, NY (college)
Originally Posted by itsnitro
do you really notice a difference with a new manifold???
I am replacing almost ALL my gaskets with FelPro during thanksgiving break.
also, my dorman upper can with the upper gaskets and throttle body gaskets. FelPro for your lowers will work just fine.
Senior Member
Posts like a Camaro
Joined: Aug 2004
Posts: 1,101
Likes: 0
From: Boca Raton, FL
Originally Posted by corvettecrazy
Lower gaskets: looks correct to me.
the upper gaskets should come with the dorman intake.
the upper gaskets should come with the dorman intake.
I need new TB bolts/nuts....whats the P/N?
*EDIT*
NEVER MIND! they come with the new UIM
if i replace the upper...should i just do the lower also!??!?! would it be pointless to do the upper and not the lower? where can I get that at?!?!?! thanks guys!!!!!!!
Senior Member
True Car Nut
Joined: Jun 2004
Posts: 6,182
Likes: 0
From: Rochester, NY (college)
yes do the lower. the hardest part is getting all the wires and crap out of the way.
the lower is another few bolts, and they are known to go bad. Do it while its easy.
the lower is another few bolts, and they are known to go bad. Do it while its easy.
Senior Member
Posts like a Camaro
Joined: Aug 2004
Posts: 1,101
Likes: 0
From: Boca Raton, FL
Originally Posted by corvettecrazy
yes do the lower. the hardest part is getting all the wires and crap out of the way.
the lower is another few bolts, and they are known to go bad. Do it while its easy.
the lower is another few bolts, and they are known to go bad. Do it while its easy.
Senior Member
True Car Nut
Joined: Jun 2004
Posts: 6,182
Likes: 0
From: Rochester, NY (college)
Originally Posted by itsnitro
Originally Posted by corvettecrazy
yes do the lower. the hardest part is getting all the wires and crap out of the way.
the lower is another few bolts, and they are known to go bad. Do it while its easy.
the lower is another few bolts, and they are known to go bad. Do it while its easy.
Senior Member
Posts like a Camaro
Joined: Aug 2004
Posts: 1,101
Likes: 0
From: Boca Raton, FL
Originally Posted by corvettecrazy
Originally Posted by itsnitro
Originally Posted by corvettecrazy
yes do the lower. the hardest part is getting all the wires and crap out of the way.
the lower is another few bolts, and they are known to go bad. Do it while its easy.
the lower is another few bolts, and they are known to go bad. Do it while its easy.
alright....so a gasket from Fedpro for the lower will be good???? thanks Corvette for the help
Thread
Thread Starter
Forum
Replies
Last Post
markviiisvt4
Performance, Brainstorming & Tuning
10
Jan 3, 2006 11:46 AM
