Back Seat Removal
Guest
Posts: n/a
-- SITE DONATOR --
True Car Nut
Joined: May 2009
Posts: 4,638
Likes: 6
I forgot to put up the picture, oops. Anyways, there are 4 clips at the top of the cushion that clip into the metal inder the rear deck. If you pull the seat away from the rear deck enough to get a flat screwdriver in, you should be able to press the clips with the screwdriver and release them. I have a picture of what the deck looks like so you would know where the clips are, just a matter of pestering me when I'm at home for them.
-- SITE DONATOR --
True Car Nut
Joined: May 2009
Posts: 4,638
Likes: 6
Delivering... 
I circled the three visible clip holes, there is one more just out of view on the left. The clips need to be depressed with a flat screw driver, and I think Sawgunner said he used a pair of long needle nose pliers? Just be careful, those clips are expensive!
There are also two bolts holding in the seat/seatbelts on the bottom, that you will be able to figure out though. The clips are the hard part.
I circled the three visible clip holes, there is one more just out of view on the left. The clips need to be depressed with a flat screw driver, and I think Sawgunner said he used a pair of long needle nose pliers? Just be careful, those clips are expensive!
There are also two bolts holding in the seat/seatbelts on the bottom, that you will be able to figure out though. The clips are the hard part.
Member
Posts like a V-Tak
Joined: Apr 2009
Posts: 80
Likes: 0
From: East Moline, IL
Yeah for mine I just pulled the top of the seat towards the front of the car enough to get a flathead down there and just push down on the clips enough to release them. It'* not hard once you figure out how to do it.
Guest
Posts: n/a
....and you guys were right, I laughed when I saw how easy it was to get the top of the back seat out!! I took the Delco speakers out of the top, and installed Infinity'* from the bottom.....ahhhhhh, much better!!! Thanks for the help !!!!Michael
Thread
Thread Starter
Forum
Replies
Last Post
