What kind of MAF readings should i be getting?
#12
Retired Senior Admin
Expert Gearhead
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
Checking my notes my scan gauge gave these readings. Not sure how this translates in to your nubmers.
With a 3.4" pulley .67 PPM
With a 3.3" pulley .90 PPM
These readings are at idle and come from the aeroforce scangauge
OK, I was looking at the wrong readings. You want MAF frequency, I don't have any notes on this with my 3.4" but with my 3.3" I'm getting about 2400 with the engine up to operation temp and idle about 900
With a 3.4" pulley .67 PPM
With a 3.3" pulley .90 PPM
These readings are at idle and come from the aeroforce scangauge
OK, I was looking at the wrong readings. You want MAF frequency, I don't have any notes on this with my 3.4" but with my 3.3" I'm getting about 2400 with the engine up to operation temp and idle about 900
Thread
Thread Starter
Forum
Replies
Last Post
Wolfedog50
Performance, Brainstorming & Tuning
3
05-08-2003 01:31 PM