P0325 CODE
#1
Junior Member
Posts like a V-Tak
Thread Starter
Join Date: Aug 2004
Location: HARRISBURG PA
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
P0325 CODE
I had my car scanned because the "check engine" light stays on. I finished swapping a 96 motor into my 95 SE. I replaced the front Knock sensor and the problem remains. I purchased another sensor to replace the rear sensor but I wanted to run this buy you guys before wasting 45 dollars on it and not have it fix my problem.
I check all the wiring to both sensors cleaned the connections, I also swapped the part that sits under the three coil packs (is that the ECM?) .... It keeps getting the P0325 error within 3 minutes after starting the car.
I need to get it fixed because it runs like crap with the timing retarded ... I just don't want to waist any more money buying sensors trying to fix the problem.
Please Help ... Thanks
I check all the wiring to both sensors cleaned the connections, I also swapped the part that sits under the three coil packs (is that the ECM?) .... It keeps getting the P0325 error within 3 minutes after starting the car.
I need to get it fixed because it runs like crap with the timing retarded ... I just don't want to waist any more money buying sensors trying to fix the problem.
Please Help ... Thanks
#3
Junior Member
Posts like a V-Tak
Thread Starter
Join Date: Aug 2004
Location: HARRISBURG PA
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Sorry for the double post .... I thought you were asking me to repost it again with a discription of the error code.
Anyone have any insight as to my problem???
Anyone have any insight as to my problem???
Thread
Thread Starter
Forum
Replies
Last Post