98 Bonneville Rear Suspension Bushings
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Jan 2006
Location: Warren MI
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
98 Bonneville Rear Suspension Bushings
Well, having tried all sorts of spray lubricants on the lower rear control arm bushings and having turned the stereo up as far as I can stand it, it looks like I will have to bite the bullet and change out the control arm bushings.
Any words of wisdom out there from anyone who'* done the job?
Any words of wisdom out there from anyone who'* done the job?
#2
Senior Member
Posts like a Turbo
Join Date: Sep 2007
Location: Saginaw, MI
Posts: 345
Likes: 0
Received 0 Likes
on
0 Posts
Pain in the azz! You are going to need to get the car up high enough to get a floor jack under the control arm so when you pop the ball joint on the rear knuckle the coil spring doesnt fly out at you. The last one I did I had to cut the mounting botls out because the were rusted right in. So soaking them in some PB BLaster the day before would be a good idea. Good Luck!!
Thread
Thread Starter
Forum
Replies
Last Post
TommyGloves
General GM Chat
5
09-03-2007 08:32 PM