I just bought a junkyard engine and trans from a 97 GTP, and see that the engine mounts are different. I used the original bonneville mounts, but the pulleys from the GTP don't work with the mount. Is part number 10564505 the right pulley assembly to use? Can I use the existing lower pulley for this set up (the one that is right up against the motor mount)?

Thanks, Al

EDIT - again: Please put your car in your signature area.

Updated!

i have done the swap of a 98 gtp to a 00 ssei, but your swap is different cuz of the torque axis mount. i dont have much experience with that, so I will let someone else answer

however, what i do know is that along with the engine and transmission, you are going to need the wiring harnesses and PCM

I have the PCM and the harness, but the harness on a GTP goes to a fuse box on the wheelwell, not to the firewall like my Bonneville. However, I have compared the harnesses and I believe I can modify my harness (trans plug, bcs, fuel pump, map, evac). I just don't know what tool to buy to fit the wires into the computer pcm connectors.