well i was doin gmy brakes tonight when my uncle noticed that i have nice hole in my light and it was all fogged up. does anyone know of a price or where i can look for a replacement passenger side headlight?

I would go to a wrecker first. Alot of LeSabre'* were built. Should be able to get a good price there.

Packing tape maybe, id sugest duct tape, but light doesnt go through it well.
LOL

get the moisture out and silicone the hole....there'* a cheap fix!

And maybe some horns mounted to the front of the hood and a few bullet hole stickers!! LMAO!!

And maybe some horns mounted to the front of the hood and a few bullet hole stickers!! LMAO!!

will u mean a junkyard right?

Patched mine the same way after it got a rock it. Little hole on the outside, but a big chunk of glass off on the inside. Removed the headlamp assembly, put a piece of Scotch tape over the hole on the outside of the lens, then laid the lens face-down on a shop rag. I put a big blob of clear silicone sealer into the hole in the lens from the back side. Let it sit that way face-down for a day or so while the silicon cured in the hole, and it'* been fine ever since.

Access to the hole from the back side wasn't too hard since I'd removed the bulb sockets. I put the blob of silicone on the end of a popsicle stick, and used that to reach into the lamp housing through the socket openings and get it exactly where it needed to go.