oil gauge
Ok folks i was driving today and my car cut out and the check gauge light came on. Well all the gauges where in the regular zone except the oil gauge it was on flat zero what could have cause this and is it some thing i could repair my self and could it be the oil pressure switch
Either your oil pump quit working, or your sending unit failed. Preferably the latter. Remove the oil filler cap, and have someone start the car. Do you see oil circulating over the valvetrain? Can you check for codes?
If a good amount of oil is circulating, it'* most likely the sending unit. Located on the rear of the engine facing the firewall, about in line with your front passenger'* left foot.
If a good amount of oil is circulating, it'* most likely the sending unit. Located on the rear of the engine facing the firewall, about in line with your front passenger'* left foot.
Make sure you have oil in it too. Not trying to talk you down or anything, but the drain plug could've came loose or the oil filter not been on tight and oil possibly leaked out. Just a thought.
Senior Member
True Car Nut
Joined: May 2003
Posts: 8,135
Likes: 1
From: Lethbridge, Alberta, _______Canada._______ West Coast Bonneville Fest ___05,06,07 Survivor___

It seems to me that if an oil pump is going it does it gradually not just suddenly, unless the drive rod on it broke away, ive seen that on a Pontiac 400......
Try the sending unit, if still no pressure, its time to operate on it!
Try the sending unit, if still no pressure, its time to operate on it!
Thread
Thread Starter
Forum
Replies
Last Post



