I took apart my column to figure out why I couldn't switch to low beams, turns out I'm missing peices...

If you look on page 3F5A-2 of the factory manual, I'm missing peice 21, 22, and 25, and I might as well replace 23 and 24 while I'm in there...

21: ACTUATOR, DIMMER SW ROD
22: PIN, SWITCH ACTUATOR PIVOT
23: SWITCH ASM, PIVOT & (PULSE)
24: BASE PLATE, COL HSG CVR END
25: CAP, COL HSG COVER END

My advice? Either go to the dealer or the wrecking yard to get these pieces. There is no aftermarket equilivants.

Hmm.... I wonder if they are open....

I told you my dealer sucked... Mon-Fri 8-4, Sat 12-2.... What kind of hours are those?

When do they sell cars!??!! During everyone'* lunch break!??!

They must, but they suck a**... They told me to "f*** o**" once because I rolled up in my old pickup to check out the Comp G they had sittin up there. They're a**holes, only there to serve the richer in the area... They can keep their f***ing cars....

I finally got ahold of some part numbers, but I had to look them up myself, the parts guys were all at lunch, sitting behind the shop... anyway, their catalog came up with $120, gmparts direct is $75. Parts ordered.

Sorry, Texas. Didn't see this post lurking down here. Too late for me to help confirm numbers, eh?

That dealership computer has pictures If I screwed that up I deserve the extra cost.

Anyway,

10499721 switch, turn signal 17.66 8.83
26021768 cap 14.80 7.40
26021767 plate 17.28 8.64
26037734 switch, dimmer 40.96 20.48
7829787 pin 6.74 3.37
7827028 actuator 14.54 7.27
*&h 9.25 19.42
total 121.23 75.41