I cant get my Hi Beams to work on my 92 SE.. It has to do with the switch/linkage that connects to the turn signal/hi beam/wind sheild wiper stick.. i was looking in the area where the stick connects to the column and there is a little metal rod that isnt connected to anything.. its just loose in the column sleeve. Then i pull back the stick to activate high beams there is no click at all.. Does anyone know where i can find a diagram on this or have any info on this.. Thank You

I have looked in the Haynes manual.. and there isnt much in there about this topic

The actuator at the end of the stalk is probably broken. Can you take it apart and get pics?

Bump for more help

bump...........

take er apart and replace it take the whole lever and switch out find whats broken see if u can fix it if not replace cmon man its simple lol

This column is a pain on a 97 as it is on all with aux steering wheel buttons. With radio controls the amount of compnents needed to remove is crazy. After an arduous turn signal switch replacement (I'll detail elsewhere) I have the same issue with the high beam rod and need to see a drawing or picture of where the actuator should nestle in.

Can anyone help?

http://www.compnine.com/index.php?t=...47577322&uid=1

Steve as i was fiddling with mine the other day there is no lever that hits a switch...there is a lever screwed to the whole switch assembly that pulls and switches when you hit the switch this is what it appeard to me i could be wrong

Thank you Chris! This drawing (and all the others with it) will be most usefull.