I forund front and back leather seats for my 92 SE are they hard to switch over. I think I an getting a good deal on them $150 for front and back.

Typicall no if its just the seat. Can you give more details like if they have power or anything like that. I did a leather seat swap nearly a year ago.

yeah, let us know which seats you are getting. If they are the dual power with the controls in the center (infamous AL7 seats) then you'll need the wiring that goes under the carpet as well. If they are just the dual power on the side of the seats, you might need the wires if yours were not power before. Might be a little more work if you had a bench. For the rear seat, that is very easy, bottom comes out no tools required and the back requires 2 nuts and 2 pseudo nuts to come off, can't remember sizes right now and then there are 2 plastic push pieces on either side of the pass through inside the trunk and then it just lifts out.

Let us know when you know more about them

it is everything the powers seats and the brackets

also what year are the seats out of.....the colors, and seatbelt have changed through the years

ok... questions needing answers so we can help you:

Do you have cloth bucket seats or bench seat?
Is your current driver'* side power? Is the passenger?

For the new seats:
Is the driver'* seat power? Is the passenger seat power?
Are the power seat controls on the seat, or are they on a center console mounted piece?

With these questions answered, we can tell you what you'll run into or need as far as electrical connections and all that. Plus if you need to get other parts, we can help you locate them.