Hello,

My 94 bonneville'* right headlight was broken. The lens is OK so far but the transparent plastic cover(? is this is right name for this part) is broken into 2 pieces. Can I just replace this one instead to buying a new whole headlight ( this is too expensive for me to buy one)?

I found a website that have cover for sale.
http://www.headlightswholesale.com/1...ght-cover.html
Is this right part?

Thanks for your great help.

I'm gonna say no...

The headlight from the 94 has GM# 16514294 BTW...

Also, could anyone explain what the difference is between the Headlight Assembly, Headlight and Headlight Cover .

Thank you

The headlight asembly is the headlight and it'* mount.
The headlight is what you need.
the headlght cover is a clear plastic peice.

Just betting though. Don't buy some $200 part til someone else chimes in.

So, the " headilght cover " is a part of headlight? Is it the one that covers the lens and buble? Or it just a thin piece that can by adhere to a good headlight to get some improved performance?

If it is the first one, why I can not just use it to replace my broken one? I checked my broken headlight. The mount, lens, buble are all alright but the plastic transparent piece is broken. I found there are two clips for holding this plastic piece on the light.

What is the part that you give part GM# 16514294 ? I tried but can not find the part. Is it some kind seal?

Thank you vry much

If your replaceing the cover you might as well replace the whole thing its going to run you about the same... just make sure you get everything minus the mount. :?

I don't see a cover here, but what you need is the $139 part.

http://www.headlightswholesale.com/c...ILLE&x=34&y=34

You can probably look at a local bone yard and find a headlight assembly for much cheaper than just the cover, and plus you wont have to worry about a good seal to keep out moisture! (If you have put one together you would know what I mean!)