Help make my new 93 run!
Guest
Posts: n/a
After looking at the Video....
I want you to lok at all of the fuses in the Maxifuse relay center... Pull them out and check them to make sure they are not blown... If they are good put them back in... In the past I have seen the fuses blow out...
At tyhe same time check and make sure that all of the fuses in the drivers hush pannel are there and good, if there are any missing replace them, also make sure they have the correct amperage...
I also noticed that the Gages did not 0 out for the Tach and speedo, nor did the other gages do the sweep...
I could not tell but did the SES light come on when you turned on the ignition?
Check all of those fuses first, I have seen a few blow out in the Maxifuse center on the H bodies...
Let us know what you find
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
I want you to lok at all of the fuses in the Maxifuse relay center... Pull them out and check them to make sure they are not blown... If they are good put them back in... In the past I have seen the fuses blow out...
At tyhe same time check and make sure that all of the fuses in the drivers hush pannel are there and good, if there are any missing replace them, also make sure they have the correct amperage...
I also noticed that the Gages did not 0 out for the Tach and speedo, nor did the other gages do the sweep...
I could not tell but did the SES light come on when you turned on the ignition?
Check all of those fuses first, I have seen a few blow out in the Maxifuse center on the H bodies...
Let us know what you find
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
Thread Starter
Senior Member
Posts like a Corvette
Joined: Mar 2005
Posts: 1,441
Likes: 0
From: Frederick, Maryland
The security light was on in the video because I was trying to start it with the drivers door open.
I checked every fuse in the car jr'* - not one is blown. Not sure if there are any missing, I'll check that.
Yes, the SeS light is on when I was trying to start it...but isn't it always on when the key is in the position right before on?
I checked every fuse in the car jr'* - not one is blown. Not sure if there are any missing, I'll check that.
Yes, the SeS light is on when I was trying to start it...but isn't it always on when the key is in the position right before on?
Thread Starter
Senior Member
Posts like a Corvette
Joined: Mar 2005
Posts: 1,441
Likes: 0
From: Frederick, Maryland
Originally Posted by Bonneville94V688
the DIC and compass doesn't come on?
If anybody could tell me where the starter relay is and the HUD, DIC and compass fuses are I'd appreciate it so I can see. I believe the HUD, DIC and compass are on one of those silver breakers...can anyone confirm this?
The HUD, DIC and compass used to come on a while ago...when I put some electricity to the car to check the milage a few months ago. Doesn't come on now.
Guest
Posts: n/a
Originally Posted by Bonneville94V688
I believe the fuses for the DIC and compass are up in the passenger kick panel.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
Thread Starter
Senior Member
Posts like a Corvette
Joined: Mar 2005
Posts: 1,441
Likes: 0
From: Frederick, Maryland
Originally Posted by jr's3800
Originally Posted by Bonneville94V688
I believe the fuses for the DIC and compass are up in the passenger kick panel.
Another odd thing I just noticed - when they keys arent in the ignition and you pull the **** out on the sentinel switch, the starts beeping like it should (to warn you the lights are on) but the AC/heater fan pulses until I push it back in....wtf???
Guest
Posts: n/a
Check the positive terminals at the battery as well as the ground buses on both sides of the car..
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
Thread Starter
Senior Member
Posts like a Corvette
Joined: Mar 2005
Posts: 1,441
Likes: 0
From: Frederick, Maryland
Originally Posted by Bonneville94V688
Uh-oh.. sounds like you have a mess of electrical problems.
jr'* - where are the ground busses? what am I checking for? Electrical is my definate weak area. I'm hoping its just one thing thats causing all of this.
Look at the pics in my other thread in 'your ride' of the fuses and relays under the hood, I can quite literally move those panels with the fuses and relays...they are loose. Maybe a bad connection there?
