Cradle Bushing
Thread Starter
Senior Member
Posts like a Corvette
Joined: Feb 2009
Posts: 1,511
Likes: 0
From: Jersey Shore

So I need to replace some cradle bushings but I can find the parts anywhere. where can I find them I also need the big washer/retainer. Thanks alot guys.
Joined: May 2006
Posts: 29,661
Likes: 43
From: Sheboygan Wisconsin






Have you checked at Auto Parts Fast at RockAuto Try sending a PM to billboost, I'm sure he knows where to get them. Otherwise Jegs or summit racing.
Senior Member
Posts like a Turbo
Joined: May 2005
Posts: 380
Likes: 1
From: Fredericton, New Brunswick.

Them suckers aren't cheap at the dealer! After all my rear ones rotted out, I decided to bite the bullet and replace them all. I had to replace the upper washer, donut, bottom donut, and the lower washer. That and there are 4 back there!! I had to cut holes in the floor to get at them. I also had to weld new steel onto the subframe itself it was that badly rotted. I think it cost 300 to 400 for the mounts! OUCH! After that, it felt like driving a new car!
Last edited by Timothy's Buick; Oct 29, 2009 at 09:36 PM. Reason: added a little more
https://www.gmforum.com/t273437/
Justin.. if you want, I typically get near cost at the dealer. Toss me your VIN and I'll go see Pete the parts guy.
I did them all the bushings on my car. Made a huge difference in handling and tightening up the car.
Got washers at the JY...not ideal but if they are still good...hadn't noticed one or two of mine were in poor shape.
Justin.. if you want, I typically get near cost at the dealer. Toss me your VIN and I'll go see Pete the parts guy.
I did them all the bushings on my car. Made a huge difference in handling and tightening up the car.
Got washers at the JY...not ideal but if they are still good...hadn't noticed one or two of mine were in poor shape.
Thread
Thread Starter
Forum
Replies
Last Post






