Changing both belts....
#1
Senior Member
Certified Car Nut
Thread Starter
Join Date: Aug 2004
Location: My reclining computer chair
Posts: 11,269
Likes: 0
Received 0 Likes
on
0 Posts
Changing both belts....
Whats the easiest way to change both belts,WITHOUT having to take the whole car apart??????
#2
Senior Member
Certified Car Nut
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes
on
0 Posts
im pretty sure that you have to mess around with the Torque axis mount for the Accessory belt.....but for the SC...just relieve the tension on the tensioner....(left hand bolt) and put on the new belt
#3
DINOSAURUS BOOSTUS
Expert Gearhead
Piece of cake.
Loosen both belts
Jack up passenger side front.
Pull wheel
Gain access to lower torque axis mount (motor mount by belts) by pulling back the plastic wheel well cover.
Doublle nut the bottom torque axis nut on the stud.
Pull stud out
Pull spacer behind mount
Slide old belts out..slide new in
Put SC belt on so you know it'* right
Put spacer back in reinstall bolt
Fix wheel well
Tire back on
Back on ground
Finish belts
Loosen both belts
Jack up passenger side front.
Pull wheel
Gain access to lower torque axis mount (motor mount by belts) by pulling back the plastic wheel well cover.
Doublle nut the bottom torque axis nut on the stud.
Pull stud out
Pull spacer behind mount
Slide old belts out..slide new in
Put SC belt on so you know it'* right
Put spacer back in reinstall bolt
Fix wheel well
Tire back on
Back on ground
Finish belts
Thread
Thread Starter
Forum
Replies
Last Post