A/C Clutch Engagement
Thread Starter
Junior Member
Posts like a V-Tak
Joined: Apr 2007
Posts: 26
Likes: 0
A/C Clutch Engagement
Pulling code PO640 Quad Driver1 or Quad Driver4. Just replaced entire A/C System. Compressor,
Dryer, New Pigtail to Compressor, Compressor Pressure Switch. Checked all switches high/low psi, a/c relay switch. Sounds like PCM or wiring harness. I NEED WIRING SCHEMATIC OF A/C system 95 SE ID K. FACTORY MANUAL JUST SHOWS BLOCK DIAGRAMS. Mr. Bill Buttermore any help would be appreciated.
Dryer, New Pigtail to Compressor, Compressor Pressure Switch. Checked all switches high/low psi, a/c relay switch. Sounds like PCM or wiring harness. I NEED WIRING SCHEMATIC OF A/C system 95 SE ID K. FACTORY MANUAL JUST SHOWS BLOCK DIAGRAMS. Mr. Bill Buttermore any help would be appreciated.
DINOSAURUS BOOSTUS
Expert Gearhead
Joined: Mar 2005
Posts: 41,391
Likes: 30
From: Enfield, CT
Each quad driver in your year drives three soleniods. If you have the FSM, then you will have the most data possible.
Take a look at the three things on that driver and let us know what it has on it. Most likely it'* one of them. If not.. you do have the flakey pcm.
Take a look at the three things on that driver and let us know what it has on it. Most likely it'* one of them. If not.. you do have the flakey pcm.
Thread
Thread Starter
Forum
Replies
Last Post
