98 Bonneville Rear Suspension Bushings
Thread Starter
Junior Member
Posts like a Ricer Type-R
Joined: Jan 2006
Posts: 23
Likes: 0
From: Warren MI
98 Bonneville Rear Suspension Bushings
Well, having tried all sorts of spray lubricants on the lower rear control arm bushings and having turned the stereo up as far as I can stand it, it looks like I will have to bite the bullet and change out the control arm bushings.
Any words of wisdom out there from anyone who'* done the job?
Any words of wisdom out there from anyone who'* done the job?
Senior Member
Posts like a Turbo
Joined: Sep 2007
Posts: 345
Likes: 0
From: Saginaw, MI
Pain in the azz! 
You are going to need to get the car up high enough to get a floor jack under the control arm so when you pop the ball joint on the rear knuckle the coil spring doesnt fly out at you. The last one I did I had to cut the mounting botls out because the were rusted right in. So soaking them in some PB BLaster the day before would be a good idea. Good Luck!!
You are going to need to get the car up high enough to get a floor jack under the control arm so when you pop the ball joint on the rear knuckle the coil spring doesnt fly out at you. The last one I did I had to cut the mounting botls out because the were rusted right in. So soaking them in some PB BLaster the day before would be a good idea. Good Luck!!
Thread
Thread Starter
Forum
Replies
Last Post
TommyGloves
General GM Chat
5
Sep 3, 2007 08:32 PM