another lim question
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Sep 2008
Location: miamisburg,ohio
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
another lim question
Well, I got started on my lim gasket replacement. Took out all the bolts on the top of the lim. And the damn thing won't budge. Are there any hidden bolts that I'm not seeing? Do I need to take the tensioner off? I know the coolant elbow needs to come off but that shouldn't keep the intake from coming off. It'* like I'm missing a bolt or two somewhere. I've even used a crow bar and it will not move. Any advice would be appreciated. P.*. Ready to open fire!!!
#3
Member
Posts like a V-Tak
Thread Starter
Join Date: Sep 2008
Location: miamisburg,ohio
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
Yes the uppers off. I got all bolts visable. It even has my dad stumped and he'* been in machine repair for 36 years. Its like theres an invisable bolt somewhere.
#4
Junior Member
Join Date: May 2007
Location: okc oklahoma
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
like 97 bonneie se says there are two bolts hidden standing in front of the car there is one on right front probley covered in oil in the intake also one in the left rear also
Last edited by rharper; 11-09-2008 at 10:35 PM. Reason: used wrong name for quote
#5
Member
Posts like a V-Tak
Thread Starter
Join Date: Sep 2008
Location: miamisburg,ohio
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
Ya I found them. Dont I feel like a dumb ***, they where covered in oil and antifreeze. Thanks for the help.
Last edited by gergman; 11-10-2008 at 08:57 AM.
Thread
Thread Starter
Forum
Replies
Last Post
slowgtp
Forced Induction
3
09-13-2007 10:32 AM