1992-1999 Series I L27 (1992-1994 SE,SLE, SSE) & Series II L36 (1995-1999 SE, SSE, SLE) and common problems for the Series I and II L67 (all supercharged models 92-99) Including Olds 88's, Olds LSS's and Buick Lesabres Please use General Chat for non-mechanical issues, and Performance and Brainstorming for improvements.

2 questions...

Old Oct 27, 2004 | 12:01 PM
  #1  
medicbearusaf's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2004
Posts: 7
Likes: 0
medicbearusaf is on a distinguished road
Default 2 questions...

OK first one how do i know what model bonne do i have? cause when i bought it (used) there are no badges at all on it...... i know its not */C though... but it does have the fog lights... which would make it an SE?

second how do you do a front wheel drive burnout never done one b4.... dont laugh but i have only owned 2 front wheel drive cars total this being the second and the first bein a ford tempo....
Reply
Old Oct 27, 2004 | 12:30 PM
  #2  
1993 SLE's Avatar
Senior Member
Certified Car Nut
 
Joined: Oct 2003
Posts: 19,756
Likes: 1
1993 SLE is on a distinguished road
Default

are the foglights in the middle of the bumper or they low and at the corners of the car. Also what year is it?

burnouts are not recommended(trans will hate you).......but hit the gas press on the parknig brake at the same time and hold on the gas
Reply
Old Oct 27, 2004 | 01:58 PM
  #3  
medicbearusaf's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2004
Posts: 7
Likes: 0
medicbearusaf is on a distinguished road
Default

its a 95 and the fog lights are kinda centerd and lower
Reply
Old Oct 27, 2004 | 02:03 PM
  #4  
vital49's Avatar
Junior Member
 
Joined: Mar 2003
Posts: 1
Likes: 5
From: Purgatory
vital49 is on a distinguished road
Default

It sounds like you have an SSE.
Reply
Old Oct 27, 2004 | 02:46 PM
  #5  
matt95ssei's Avatar
Senior Member
Posts like a 4 Banger
 
Joined: Sep 2004
Posts: 143
Likes: 0
From: Canada, ON
matt95ssei is on a distinguished road
Default

Its not as bad to do a burn-out if you DONT use the brakes. That puts incredible stress on the trans components, such as gears, differential, and torque converter, and a mess of other fun stuff! Also, you could pop a CV Joint. Those cost a few dollars and aren't friendly when they break. Chances are you'll blow something else up in the process of blowing a CV. Take it from someone who had that experience (while leaving the shop that had just replaced my CV joint)

Also, stay AWAY from one wheel / turning corner burnouts. That will blow your diff real fast.

If you want to do a burnout, try using the Parking Brake and do it on something you think both tires will slip easily.

~Matt
Reply
Old Oct 27, 2004 | 02:53 PM
  #6  
vital49's Avatar
Junior Member
 
Joined: Mar 2003
Posts: 1
Likes: 5
From: Purgatory
vital49 is on a distinguished road
Default

Originally Posted by matt95ssei
Its not as bad to do a burn-out if you DONT use the brakes. That puts incredible stress on the trans components, such as gears, differential, and torque converter, and a mess of other fun stuff! Also, you could pop a CV Joint. Those cost a few dollars and aren't friendly when they break. Chances are you'll blow something else up in the process of blowing a CV. Take it from someone who had that experience (while leaving the shop that had just replaced my CV joint)

Also, stay AWAY from one wheel / turning corner burnouts. That will blow your diff real fast.

If you want to do a burnout, try using the Parking Brake and do it on something you think both tires will slip easily.

~Matt
Um...we don't have differentials! But, good advice otherwise.
Reply
Old Oct 27, 2004 | 03:30 PM
  #7  
94bonnyV's Avatar
Senior Member
Posts like a Turbo
 
Joined: Feb 2003
Posts: 302
Likes: 0
From: Detroit
94bonnyV is on a distinguished road
Default

umm... my bonny will sqwack a if i hit it just right
Reply
Old Oct 27, 2004 | 07:09 PM
  #8  
SSEimatt93's Avatar
Senior Member
True Car Nut
 
Joined: May 2003
Posts: 8,135
Likes: 1
From: Lethbridge, Alberta, _______Canada._______ West Coast Bonneville Fest ___05,06,07 Survivor___
SSEimatt93 is on a distinguished road
Default

Originally Posted by vital49
Originally Posted by matt95ssei
Its not as bad to do a burn-out if you DONT use the brakes. That puts incredible stress on the trans components, such as gears, differential, and torque converter, and a mess of other fun stuff! Also, you could pop a CV Joint. Those cost a few dollars and aren't friendly when they break. Chances are you'll blow something else up in the process of blowing a CV. Take it from someone who had that experience (while leaving the shop that had just replaced my CV joint)

Also, stay AWAY from one wheel / turning corner burnouts. That will blow your diff real fast.

If you want to do a burnout, try using the Parking Brake and do it on something you think both tires will slip easily.

~Matt
Um...we don't have differentials! But, good advice otherwise.
Yeah they do have built in diffrerentials
Reply
Old Oct 27, 2004 | 07:36 PM
  #9  
medicbearusaf's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2004
Posts: 7
Likes: 0
medicbearusaf is on a distinguished road
Default

so bein stock how many hp does it have? and what kind of cars can i look at racing without gettin smoked.... :?:
Reply
Old Oct 27, 2004 | 10:08 PM
  #10  
ssesc93's Avatar
Senior Member
True Car Nut
 
Joined: May 2003
Posts: 7,262
Likes: 0
ssesc93 is on a distinguished road
Default

Lets see some pics!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
dbeast420
Lounge
2
May 6, 2006 02:49 AM
Hailey
Performance, Brainstorming & Tuning
35
Mar 18, 2004 11:39 AM
BonneMeMN
Performance, Brainstorming & Tuning
4
Oct 8, 2003 10:31 AM
big_boss2010
1992-1999
2
Sep 6, 2003 12:41 PM
brian89gp
General GM Chat
26
Aug 6, 2002 11:52 PM


Thread Tools
Search this Thread

All times are GMT -4. The time now is 05:47 PM.