1997 wont blow out the center a/c vents, WHY?
Originally Posted by randman1
James is looking at the back of the ECC control head, not the HVAC programmer. There are only wires connected to the control head. There are colored vacuum lines (pictured above) and one large electrical and one small electrical connector going to the programmer.
I did get your pictures...
Step back 3 feet, slap your face, drink a glass of water and sit down......
YOU ARE LOOKING IN THE WRONG AREA OF THE DASH FOR THE HAVC!!!!!!!!!!
that is your problem, look under the passenger side compartment, 6-8" from the lower side panel and look up, it is there on a 97.
Step back 3 feet, slap your face, drink a glass of water and sit down......
YOU ARE LOOKING IN THE WRONG AREA OF THE DASH FOR THE HAVC!!!!!!!!!!
that is your problem, look under the passenger side compartment, 6-8" from the lower side panel and look up, it is there on a 97.
Thread Starter
Senior Member
Posts like a Northstar
Joined: Dec 2003
Posts: 589
Likes: 0
From: Rockwall County Texas

Not sure where that is yet. Uhm I have took the glove compartment out. Passengers side?? inside the car? Look up and see what? wires or something?
ECC and Hvac are different things... My ECC doesnt have vacuum lines to it?
so lost now.
ECC and Hvac are different things... My ECC doesnt have vacuum lines to it?
so lost now.
Originally Posted by james tharp
So the thing that Randman sent a picture of is not the ECC or the airconditioner control unit that is over the radio?
Thread Starter
Senior Member
Posts like a Northstar
Joined: Dec 2003
Posts: 589
Likes: 0
From: Rockwall County Texas

Id say I was off alot. So this is where all the vacuum lines go to. Sorry about that. I was looking at the wrong thing. How the heck do you get into this?
Originally Posted by james tharp
Id say I was off alot. So this is where all the vacuum lines go to. Sorry about that. I was looking at the wrong thing. How the heck do you get into this?


