1987-1991 Parley with regards to your 1987 to 1991 Bonneville, Olds 88 or Buick Le Sabre Please use General Chat for non-mechanical issues, and Performance and Brainstorming for improvements.

SSE Cluster

Old Jan 31, 2004 | 07:11 PM
  #1  
Tonyrodz's Avatar
Thread Starter
Senior Member
Posts like a Turbo
 
Joined: Sep 2002
Posts: 260
Likes: 0
From: Nj/Pa
Tonyrodz is on a distinguished road
Default SSE Cluster

I know this is a common problem on our cars--does someone know why our compass and info center crap out all the time? Could it be a bad ground strap or something? mine would come on sometimes for a minute or so then go back out--now they don't come on at all anymore. Once they went on(just sitting-running in my driveway). I was able to probe for power on the connections behind the cluster and everything showed like it was getting power. I even swapped fuses and(can't think what the hell they're called right now)the resistors behind the glove box w/no results. That'* what makes me think it could be a ground somewhere rubbing or something.
Does anyone have any input or ideas on this?
thanks for any help.
Reply
Old Jan 31, 2004 | 08:18 PM
  #2  
fuddyduddy121's Avatar
Senior Member
True Car Nut
 
Joined: Sep 2002
Posts: 3,392
Likes: 3
fuddyduddy121 is on a distinguished road
Default

http://www.bonnevilleclub.com/techinfo/?article=56
Reply
Old Feb 1, 2004 | 01:04 AM
  #3  
Tonyrodz's Avatar
Thread Starter
Senior Member
Posts like a Turbo
 
Joined: Sep 2002
Posts: 260
Likes: 0
From: Nj/Pa
Tonyrodz is on a distinguished road
Default

I've already taken my entire cluster apart w/no different results. Once the weather gets warmer I'll do it again and make sure the solder is all good.
The article isn't for my 89--but is it all the same? Meaning this is a very common problem among all the years?
Reply
Old Feb 1, 2004 | 03:49 AM
  #4  
fuddyduddy121's Avatar
Senior Member
True Car Nut
 
Joined: Sep 2002
Posts: 3,392
Likes: 3
fuddyduddy121 is on a distinguished road
Default

I've heard of your problem, but I can only testify that the above solution works with the 92-99...

In the 92-99, it'* not the solder points so much as the internal wiring harnesses and plug contacts. Not the ones on the back of the cluster, but the ones INSIDE the cluster.
Reply
Old Feb 1, 2004 | 05:30 PM
  #5  
shortstuf212559's Avatar
Executed
 
Joined: Dec 2002
Posts: 0
Likes: 0
From: Purgatory
shortstuf212559 is on a distinguished road
Default

my 90 did the same thing, and i replaced the plastic thing on the back of the cluster. where the power runs through and stuff.. the problem is the cluster. if you swap out the clusters they will work. the thing plastic "board" i guess i can call it, is GREEN if its original. Blue if its been reman'd.
Reply
Old Feb 2, 2004 | 06:00 PM
  #6  
Tonyrodz's Avatar
Thread Starter
Senior Member
Posts like a Turbo
 
Joined: Sep 2002
Posts: 260
Likes: 0
From: Nj/Pa
Tonyrodz is on a distinguished road
Default

Originally Posted by shortstuf212559
my 90 did the same thing, and i replaced the plastic thing on the back of the cluster. where the power runs through and stuff.. the problem is the cluster. if you swap out the clusters they will work. the thing plastic "board" i guess i can call it, is GREEN if its original. Blue if its been reman'd.
Would you have a pic of the part you're talking about? I've swapped clusters and neither worked.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
JUNIOR74
Everything Electrical & Electronic
1
Apr 20, 2008 08:59 PM
bonnevillelover
Detailing & Appearance
1
Nov 14, 2007 06:39 PM
VigCS
Everything Electrical & Electronic
8
Feb 12, 2006 01:38 AM
crzydmnd72
1987-1991
3
May 12, 2004 12:49 PM
BonnevilleSSEGuy
General GM Chat
1
Jan 1, 2004 02:35 PM


Thread Tools
Search this Thread

All times are GMT -4. The time now is 02:34 PM.